Absolute Maximum Ratings (Notes 1, 3)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage, VCC
Bias Voltage, VBB
Input Voltage, VIN
Storage Temperature Range, TSTG
Lead Temperature (Soldering,
ESD Tolerance, Human Body Model
0V to 4.5V
-65˚C to +150˚C
Limits of Operating Ranges (Note 2)
VCC +60V to +85V
VBB +8V to 15V
VIN 0V to +3.75V
+15V to +75V
-20˚C to +100˚C
Do not operate the part without a heat sink.
(See Figure 3 for Test Circuit)
Unless otherwise noted: VCC = +80V, VBB = +12V, CL = 8pF, TC = 50˚C.
DC Tests: VIN = +2.25VDC
AC Tests: Output = 40VPP (25V - 65V) at 1MHz
Min Typ Max Units
ICC Supply Current
Per Channel, No Input Signal, No
8 12 mA
DC Output Voltage
DC Voltage Gain
All three Channels
15 25 mA
No AC Input Signal, VIN = 1.25V
No AC Input Signal
-18 -20 -22
Note 4, No AC Input Signal
Note 4, 5, No AC Input Signal
tR Rise Time
tF Fall Time
Note 6, 10% to 90%
Note 6, 90% to 10%
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Note 2: Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and
the test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may
change when the device is not operated under the listed test conditions.
Note 3: All voltages are measured with respect to GND, unless otherwise specified.
Note 4: Calculated value from Voltage Gain test on each channel.
Note 5: Linearity Error is the variation in DC Gain from Vin = 1.0 volts to Vin = 3.5 volts.
Note 6: Input from signal generator: tR, tF < 1nS.
AC Test Circuit
FIGURE 3. Test Circuit (One Channel)