Absolute Maximum Ratings (Notes 1,
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (VCC)
Bias Voltage (VBB)
Input Voltage (VIN)
Storage Temperature Range (TSTG)
(Soldering, <10 sec.)
Human Body Model
−0.5V to VBB +0.5V
−65˚C to +150˚C
Operating Ratings (Note 2)
+100V to +230V
+7V to +13V
+0V to +5V
+40V to +215V
Do not operate the part without a heat sink.
(See Figure 2 for Test Circuit) Unless otherwise noted: VCC = +220V, VBB = +12V, CL = 10 pF, TC = 50˚C. DC Tests: VIN =
+2.75VDC. AC Tests: Output = 130VPP (60V – 190V) at 1 MHz.
Min Typ Max
ICC Supply Current
No Input Signal, No Video Input, No
21 28 mA
DC Output Voltage
DC Output Voltage
DC Voltage Gain
No AC Input Signal, VIN = 2.75VDC
No AC Input Signal, VIN = 1.25VDC
No AC Input Signal
(Note 4), No AC Input Signal
(Notes 4, 5), No AC Input Signal
9 15 22 mA
120 125 130 VDC
200 205 210 VDC
−51 −54 −57 V/V
Rise Time, 60V to 190V
(Note 6), 10% to 90%
Fall Time, 60V to 190V
(Note 6), 90% to 10%
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Note 2: Operating ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and
test conditions, see the Electrical Characteristics. Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may change when the device is not operated under the listed test
Note 3: All voltages are measured with respect to GND, unless otherwise specified.
Note 4: Calculated value from Voltage Gain test on each channel.
Note 5: Linearity Error is the variation in DC gain from VIN = 1.15V to VIN = 4.35V.
Note 6: Input from signal generator: tr, tf < 1 ns.