http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




NXP Semiconductors Electronic Components Datasheet

LPC54607 Datasheet

32-bit ARM Cortex-M4 microcontroller

No Preview Available !

LPC54607 pdf
LPC546xx
32-bit ARM Cortex-M4 microcontroller; up to 512 KB flash and
200 kB SRAM; High-speed USB device/host + PHY; Full-speed
USB device/host; Ethernet AVB; LCD; EMC; SPIFI; CAN FD,
SDIO; SHA; 12-bit 5 Msamples/s ADC; DMIC subsystem
Rev. 1.9 — 9 November 2017
Product data sheet
1. General description
The LPC546xx is a family of ARM Cortex-M4 based microcontrollers for embedded
applications featuring a rich peripheral set with very low power consumption and
enhanced debug features.
The ARM Cortex-M4 is a 32-bit core that offers system enhancements such as low power
consumption, enhanced debug features, and a high level of support block integration. The
ARM Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard architecture with
separate local instruction and data buses as well as a third bus for peripherals, and
includes an internal prefetch unit that supports speculative branching. The ARM
Cortex-M4 supports single-cycle digital signal processing and SIMD instructions. A
hardware floating-point processor is integrated into the core.
The LPC546xx family includes up to 512 KB of flash, 200 KB of on-chip SRAM, up to
16 kB of EEPROM memory, a quad SPI Flash Interface (SPIFI) for expanding program
memory, one high-speed and one full-speed USB host and device controller, Ethernet
AVB, LCD controller, Smart Card Interfaces, SD/MMC, CAN FD, an External Memory
Controller (EMC), a DMIC subsystem with PDM microphone interface and I2S, five
general-purpose timers, SCTimer/PWM, RTC/alarm timer, Multi-Rate Timer (MRT), a
Windowed Watchdog Timer (WWDT), ten flexible serial communication peripherals
(USART, SPI, I2S, I2C interface), Secure Hash Algorithm (SHA), 12-bit 5.0 Msamples/sec
ADC, and a temperature sensor.
2. Features and benefits
ARM Cortex-M4 core (version r0p1):
ARM Cortex-M4 processor, running at a frequency of up to 220 MHz.
The LPC5460x/61x devices operate at CPU frequencies of up to 180 MHz. The
LPC54628 device operates at CPU frequencies of up to 220 MHz.
Floating Point Unit (FPU) and Memory Protection Unit (MPU).
ARM Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC).
Non-maskable Interrupt (NMI) input with a selection of sources.
Serial Wire Debug (SWD) with six instruction breakpoints, two literal comparators,
and four watch points. Includes Serial Wire Output and ETM Trace for enhanced
debug capabilities, and a debug timestamp counter.
System tick timer.


NXP Semiconductors Electronic Components Datasheet

LPC54607 Datasheet

32-bit ARM Cortex-M4 microcontroller

No Preview Available !

LPC54607 pdf
NXP Semiconductors
LPC546xx
32-bit ARM Cortex-M4 microcontroller
On-chip memory:
Up to 512 KB on-chip flash program memory with flash accelerator and 256 byte
page erase and write.
Up to 200 KB total SRAM consisting of 160 KB contiguous main SRAM and an
additional 32 KB SRAM on the I&D buses. 8 KB of SRAM bank intended for USB
traffic.
16 KB of EEPROM.
ROM API support:
Flash In-Application Programming (IAP) and In-System Programming (ISP).
ROM-based USB drivers (HID, CDC, MSC, and DFU). Flash updates via USB.
Booting from valid user code in flash, USART, SPI, and I2C.
Legacy, Single, and Dual image boot.
OTP API for programming OTP memory.
Random Number Generator (RNG) API.
Serial interfaces:
Flexcomm Interface contains up to ten serial peripherals. Each Flexcomm Interface
can be selected by software to be a USART, SPI, or I2C interface. Two Flexcomm
Interfaces also include an I2S interface. Each Flexcomm Interface includes a FIFO
that supports USART, SPI, and I2S if supported by that Flexcomm Interface. A
variety of clocking options are available to each Flexcomm Interface and include a
shared fractional baud-rate generator.
I2C-bus interfaces support Fast-mode and Fast-mode Plus with data rates of up to
1Mbit/s and with multiple address recognition and monitor mode. Two sets of true
I2C pads also support High Speed Mode (3.4 Mbit/s) as a slave.
Two ISO 7816 Smart Card Interfaces with DMA support.
USB 2.0 high-speed host/device controller with on-chip high-speed PHY.
USB 2.0 full-speed host/device controller with on-chip PHY and dedicated DMA
controller supporting crystal-less operation in device mode.
SPIFI with XIP feature uses up to four data lines to access off-chip SPI/DSPI/QSPI
flash memory at a much higher rate than standard SPI or SSP interfaces.
Ethernet MAC with MII/RMII interface with Audio Video Bridging (AVB) support and
dedicated DMA controller.
Two CAN FD modules with dedicated DMA controller.
Digital peripherals:
DMA controller with 30 channels and up to 24 programmable triggers, able to
access all memories and DMA-capable peripherals.
LCD Controller supporting both Super-Twisted Nematic (STN) and Thin-Film
Transistor (TFT) displays. It has a dedicated DMA controller, selectable display
resolution (up to 1024 x 768 pixels), and supports up to 24-bit true-color mode.
External Memory Controller (EMC) provides support for asynchronous static
memory devices such as RAM, ROM and flash, in addition to dynamic memories
such as single data rate SDRAM with an SDRAM clock of up to 100 MHz. EMC bus
width (bit) on TFBGA180, TFBGA100, and LQFP100 and packages supports up to
8/16 data line wide static memory, in addition to dynamic memories, such as,
SDRAM (2 banks only) with an SDRAM clock of up to 100 MHz.
Secured digital input/output (SD/MMC and SDIO) card interface with DMA support.
LPC546xx
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1.9 — 9 November 2017
© NXP Semiconductors N.V. 2017. All rights reserved.
2 of 166


Part Number LPC54607
Description 32-bit ARM Cortex-M4 microcontroller
Maker NXP
Total Page 30 Pages
PDF Download
LPC54607 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 LPC54605 32-bit ARM Cortex-M4 microcontroller NXP
NXP
LPC54605 pdf
2 LPC54606 32-bit ARM Cortex-M4 microcontroller NXP
NXP
LPC54606 pdf
3 LPC54607 32-bit ARM Cortex-M4 microcontroller NXP
NXP
LPC54607 pdf
4 LPC54608 32-bit ARM Cortex-M4 microcontroller NXP
NXP
LPC54608 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components