http://www.www.datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Micron
Micron

MTFDDAK2T0TBN Datasheet Preview

MTFDDAK2T0TBN Datasheet

1100 2.5-Inch and M.2 SATA NAND Flash SSD

No Preview Available !

MTFDDAK2T0TBN pdf
1100 2.5-Inch and M.2 NAND Flash SSD
Features
1100 2.5-Inch and M.2 SATA NAND Flash
SSD
MTFDDAK256TBN, MTFDDAK512TBN, MTFDDAK1T0TBN,
MTFDDAK2T0TBN, MTFDDAV256TBN, MTFDDAV512TBN,
MTFDDAV1T0TBN
Features
• Micron® 3D TLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal 2.0-compliant self-encrypting drive
(SED)
• Compatible with Microsoft eDrive®
• Hardware-based AES-256 encryption engine
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Hot-plug/hot-remove capable (2.5")
• Device sleep (DEVSLP), extreme low-power mode
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS3 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Sanitize device feature set support
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Dynamic write acceleration
• Adaptive thermal monitoring
• Power loss protection for data-at-rest
• Performance1, 2
– PCMark® Vantage (HDD test suite score): Up to
84,000
– Sequential 128KB READ: Up to 530 MB/s
– Sequential 128KB WRITE: Up to 500 MB/s
– Random 4KB READ: Up to 55,000 IOPS
– Random 4KB WRITE: Up to 83,000 IOPS
– READ/WRITE latency: 85µs/40µs (TYP)
• Reliability
– MTTF: 1.5 million device hours3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 1015 bits read
• Low power consumption
– Device Sleep numbers: <4mW
– DIPM numbers: 110mW TYP4
• Endurance: Total bytes written (TBW)
– 120TB
• Capacity (unformatted): 128GB
• 2.5-inch × 7mm form factor
• Secure firmware update with digitally signed firm-
ware image
• Operating temperature
– Commercial (0°C to +70°C)5
Notes:
1. Typical I/O performance numbers as meas-
ured fresh-out-of-the-box (FOB) using Iome-
ter with a queue depth of 32 and write
cache enabled.
2. 4 KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active average power measured during exe-
cution of MobileMark® with DIPM (device-
initiated power management) enabled.
5. Temperature measured by SMART attribute
194.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. D 10/17 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.



Micron
Micron

MTFDDAK2T0TBN Datasheet Preview

MTFDDAK2T0TBN Datasheet

1100 2.5-Inch and M.2 SATA NAND Flash SSD

No Preview Available !

MTFDDAK2T0TBN pdf
1100 2.5-Inch and M.2 NAND Flash SSD
Features
Part Numbering Information
Micron’s 1100 SSD is available in different configurations and densities. The chart below is a comprehensive list of
options for the 1100 series devices; not all options listed can be combined to define an offered product. Visit
www.micron.com for a list of valid part numbers.
Figure 1: Part Number Chart
MT FD D AK 256 T BN - 1 AR 1
2 AB YY ES
Micron Technology
Product Family
FD = Flash drive
Drive Interface
D = SATA 6.0 Gb/s
Drive Form Factor
AK = 2.5-inch (7mm)
AV = M.2 (80mm x 22mm)
Drive Density
256 = 256GB
512 = 512GB
1T0 = 1024GB
2T0 = 2048GB
NAND Flash Type
T = TLC
Product Family
BN = 1100
Production Status
Blank = Production
ES = Engineering sample
Customer Designator
YY = Standard
Feature Set
AB = Standard
TA = TAA Compliant
ZZ = Blank
Extended Firmware Features
Z = Non-Encrypted
2 = SED (self-encrypting drive)
Sector Size
1 = 512 byte
NAND Flash Component
AR = 384Gb, TLC, x16, 1.8V (3D)
BOM Revision
For example:
1 = 1st generation
2 = 2nd generation
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. D 10/17 EN
2 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.


Part Number MTFDDAK2T0TBN
Description 1100 2.5-Inch and M.2 SATA NAND Flash SSD
Maker Micron
Total Page 30 Pages
PDF Download
MTFDDAK2T0TBN pdf
MTFDDAK2T0TBN Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 MTFDDAK2T0TBN 1100 2.5-Inch and M.2 SATA NAND Flash SSD Micron
Micron
MTFDDAK2T0TBN pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy