IttyBitty™ Integrated High-Side Switch
The MIC2514 is an integrated high-side power switch that
consists of a TTL compatible input and protected
P-channel MOSFET. The MIC2514 can be used instead of
a separate high-side driver and MOSFET in many low-
The MIC2514 switches voltage ranging from 3V to 13.5V and
delivers more than 400mA continuous current. A slow turn-
on feature prevents high inrush current when switching
capacitive loads. The internal control circuitry is powered
from the unswitched 3V to 13.5V input.
Current limiting is internally fixed at approximately 1.9A and
requires no external components.
Thermal shutdown turns off the output if the die temperature
exceeds approximately 170°C.
The MIC2514 is available in the 5-lead SOT-23-5 package
with a temperature range of –40°C to +85°C.
• MOSFET on-resistance
1.5Ω typical at 5V
0.95Ω typical at 12V
• 3V to 13.5V input
• 25µA typical on-state supply current at 5V
• <1µA typical off-state supply current at 5V
• Current limit
• Thermal shutdown
• Slow turn-on
• 3.3V to 13.5V power management
–40°C to +85°C
IN GND CTL
5-Lead SOT-23-5 (M5)
3V to 13.5V
IN 3 0.1µF
High-Side Power Switch
Control (Input): Noninverting TTL compatible control input.
High = on, low = off.
Supply Input: Output MOSFET source. Also supplies IC’s internal circuitry.
Connect to supply.
Switch Output: Output MOSFET drain. Connect to switched side
Not internally connected. Connect to ground plane for lowest package