http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX1278 Datasheet

(MAX1276 / MAX1278) 12-Bit ADCs

No Preview Available !

MAX1278 pdf
19-3364; Rev 0; 8/04
www.DataSheet4U.com
1.8Msps, Single-Supply, Low-Power, True-
Differential, 12-Bit ADCs with Internal Reference
General Description
The MAX1276/MAX1278 are low-power, high-speed, seri-
al-output, 12-bit, analog-to-digital converters (ADCs) that
operate at up to 1.8Msps and have an internal reference.
These devices feature true-differential inputs, offering bet-
ter noise immunity, distortion improvements, and a wider
dynamic range over single-ended inputs. A standard
SPI™/QSPI™/MICROWIRE™ interface provides the clock
necessary for conversion. These devices easily interface
with standard digital signal processor (DSP) synchronous
serial interfaces.
The MAX1276/MAX1278 operate from a single +4.75V to
+5.25V supply voltage. The MAX1276/MAX1278 include
a 4.096V internal reference. The MAX1276 has a unipolar
analog input, while the MAX1278 has a bipolar analog
input. These devices feature a partial power-down mode
and a full power-down mode for use between conver-
sions, which lower the supply current to 2mA (typ) and
1µA (max), respectively. Also featured is a separate
power-supply input (VL), which allows direct interfacing to
+1.8V to VDD digital logic. The fast conversion speed,
low-power dissipation, excellent AC performance, and DC
accuracy (±1.25 LSB INL) make the MAX1276/MAX1278
ideal for industrial process control, motor control, and
base-station applications.
The MAX1276/MAX1278 come in a 12-pin TQFN pack-
age, and are available in the commercial (0°C to +70°C)
and extended (-40°C to +85°C) temperature ranges.
Features
1.8Msps Sampling Rate
Only 55mW (typ) Power Dissipation
Only 1µA (max) Shutdown Current
High-Speed, SPI-Compatible, 3-Wire Serial Interface
70dB S/(N + D) at 525kHz Input Frequency
Internal True-Differential Track/Hold (T/H)
Internal 4.096V Reference
No Pipeline Delays
Small 12-Pin TQFN Package
Ordering Information
PART
MAX1276CTC-T
MAX1276ETC-T
MAX1278CTC-T
MAX1278ETC-T
TEMP RANGE
PIN-
PACKAGE
0°C to +70°C
-40°C to +85°C
0°C to +70°C
-40°C to +85°C
12 TQFN-12
12 TQFN-12
12 TQFN-12
12 TQFN-12
INPUT
Unipolar
Unipolar
Bipolar
Bipolar
Data Acquisition
Bill Validation
Motor Control
Applications
Communications
Portable Instruments
Pin Configuration
TOP VIEW
AIN+ N.C. SCLK
12 11 10
AIN- 1
REF 2
RGND 3
MAX1276
MAX1278
9 CNVST
8 DOUT
7 VL
456
VDD N.C. GND
TQFN
Typical Operating Circuit
4.75V TO +5.25V
+1.8V TO VDD
10µF 0.01µF
0.01µF
VDD VL
DIFFERENTIAL +
INPUT
VOLTAGE -
4.7µF 0.01µF
AIN+ DOUT
AIN-
MAX1276
MAX1278 CNVST
SCLK
REF
RGND
GND
10µF
µC/DSP
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX1278 Datasheet

(MAX1276 / MAX1278) 12-Bit ADCs

No Preview Available !

MAX1278 pdf
www.DataSheet4U.com
1.8Msps, Single-Supply, Low-Power, True-
Differential, 12-Bit ADCs with Internal Reference
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Inputs
to GND .................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Output
to GND ....................-0.3V to the lower of (VL + 0.3V) and +6V
Analog Inputs and
REF to GND..........-0.3V to the lower of (VDD + 0.3V) and +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Ranges
MAX127_ CTC ...................................................0°C to +70°C
MAX127_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = VDD, fSCLK = 28.8MHz, 50% duty cycle, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
DC ACCURACY
Resolution
Relative Accuracy
Differential Nonlinearity
Offset Error
SYMBOL
CONDITIONS
INL
DNL
(Notes 1, 2)
(Notes 1, 3)
MIN TYP MAX UNITS
12
-1.25
-1.0
+1.25
+1.0
±6.0
Bits
LSB
LSB
LSB
Offset-Error Temperature
Coefficient
±1 ppm/°C
Gain Error
Offset nulled
±6.0 LSB
Gain Temperature Coefficient
±2 ppm/°C
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD (Note 1)
69
70
dB
Total Harmonic Distortion
THD Up to the 5th harmonic (Note 1)
-80 -76
dB
Spurious-Free Dynamic Range
SFDR (Note 1)
-83 -76
dB
Intermodulation Distortion
IMD fIN1 = 250kHz, fIN2 = 300kHz
-78 dB
Full-Power Bandwidth
-3dB point, small-signal method
20 MHz
Full-Linear Bandwidth
S/(N + D) > 68dB, single ended
2.0 MHz
CONVERSION RATE
Minimum Conversion Time
tCONV (Note 4)
0.556
µs
Maximum Throughput Rate
1.8 Msps
Minimum Throughput Rate
(Note 5)
10 ksps
Track-and-Hold Acquisition Time
Aperture Delay
tACQ (Note 6)
104 ns
5 ns
Aperture Jitter
(Note 7)
30 ps
External Clock Frequency
ANALOG INPUTS (AIN+, AIN-)
fSCLK
28.8 MHz
Differential Input Voltage Range
AIN+ - AIN-, MAX1276
VIN AIN+ - AIN-, MAX1278
0
-VREF / 2
VREF
+VREF / 2
V
Absolute Input Voltage Range
0
VDD
V
2 _______________________________________________________________________________________


Part Number MAX1278
Description (MAX1276 / MAX1278) 12-Bit ADCs
Maker Maxim Integrated Products
Total Page 18 Pages
PDF Download
MAX1278 pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 MAX127 Multirange / +5V / 12-Bit DAS with 2-Wire Serial Interface Maxim
Maxim
MAX127 pdf
2 MAX1270 Serial 12-Bit ADCs Maxim Integrated
Maxim Integrated
MAX1270 pdf
3 MAX1271 Serial 12-Bit ADCs Maxim Integrated
Maxim Integrated
MAX1271 pdf
4 MAX1272 12-Bit ADCs Maxim Integrated
Maxim Integrated
MAX1272 pdf
5 MAX1273 12-Bit ADCs Maxim Integrated
Maxim Integrated
MAX1273 pdf
6 MAX1274 (MAX1274 / MAX1275) 12-Bit ADCs Maxim Integrated Products
Maxim Integrated Products
MAX1274 pdf
7 MAX1275 (MAX1274 / MAX1275) 12-Bit ADCs Maxim Integrated Products
Maxim Integrated Products
MAX1275 pdf
8 MAX1276 (MAX1276 / MAX1278) 12-Bit ADCs Maxim Integrated Products
Maxim Integrated Products
MAX1276 pdf
9 MAX1277 (MAX1277 / MAX1279) 12-Bit ADCs Maxim Integrated Products
Maxim Integrated Products
MAX1277 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components