http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX6732 Datasheet

Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output

No Preview Available !

MAX6732 pdf
19-2629; Rev 2; 1/03
Single-/Dual-/Triple-Voltage µP Supervisory
Circuits with Independent Watchdog Output
General Description
The MAX6730–MAX6735 single-/dual-/triple-voltage
microprocessor (µP) supervisors feature a watchdog
timer and manual reset capability. The MAX6730–
MAX6735 offer factory-set reset thresholds for monitor-
ing voltages from +0.9V to +5V and an adjustable reset
input for monitoring voltages down to +0.63V. The com-
bination of these features significantly improves system
reliability and accuracy when compared to separate
ICs or discrete components.
The active-low reset output asserts and remains asserted
for the reset timeout period after all the monitored volt-
ages exceed their respective thresholds. Multiple factory-
set reset threshold combinations reduce the number of
external components required. The MAX6730/MAX6731
monitor a single fixed voltage, the MAX6732/MAX6733
monitor two fixed voltages, and the MAX6734/MAX6735
monitor two fixed voltages and one adjustable voltage. All
devices are offered with six minimum reset timeout peri-
ods ranging from 1.1ms to 1120ms.
The MAX6730–MAX6735 feature a watchdog timer with
an independent watchdog output. The watchdog timer
prevents system lockup during code execution errors.
A watchdog startup delay of 54s after reset asserts
allows system initialization during power-up. The watch-
dog operates in normal mode with a 1.68s delay after
initialization. The MAX6730/MAX6732/MAX6734 provide
an active-low, open-drain watchdog output. The
MAX6731/MAX6733/MAX6735 provide an active-low,
push-pull watchdog output.
Other features include a manual reset input (MAX6730/
MAX6731/MAX6734/MAX6735) and push-pull reset out-
put (MAX6731/MAX6733/MAX6735) or open-drain reset
output (MAX6730/MAX6732/MAX6734). The MAX6730–
MAX6733 are offered in a tiny SOT23-6 package. The
MAX6734/MAX6735 are offered in a space-saving
SOT23-8 package. All devices are fully specified over
the extended temperature range (-40°C to +85°C).
Applications
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
Portable/Battery-Operated Equipment
Industrial Equipment
Printer/Fax
Set-Top Boxes
Features
o VCC1 (Primary Supply) Reset Threshold Voltages
from +1.575V to +4.63V
o VCC2 (Secondary Supply) Reset Threshold
Voltages from +0.79V to +3.08V
o Adjustable RSTIN Threshold for Monitoring
Voltages Down to +0.63V (MAX6734/MAX6735 Only)
o Six Reset Timeout Options
o Watchdog Timer with Independent Watchdog Output
35s (min) Initial Watchdog Startup Period
1.12s (min) Normal Watchdog Timeout Period
o Manual Reset Input
(MAX6730/MAX6731/MAX6734/MAX6735)
o Guaranteed Reset Valid down to
VCC1 or VCC2 = +0.8V
o Push-Pull RESET or Open-Drain RESET Output
o Immune to Short VCC Transients
o Low Supply Current: 14µA (typ) at +3.6V
o Small 6-Pin and 8-Pin SOT23 Packages
Ordering Information
PART*
MAX6730 UT_D_ -T
MAX6731 UT_D_ -T
MAX6732 UT_ _D_ -T
MAX6733 UT_ _D_ -T
MAX6734 KA_ _D_ -T
MAX6735 KA_ _D_ -T
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
6 SOT23-6
6 SOT23-6
6 SOT23-6
6 SOT23-6
8 SOT23-8
8 SOT23-8
*Note: Insert the threshold level suffixes for VCC1 and VCC2
(Table 1) after “UT” or “KA.” For the MAX6730/MAX6731, insert
only the VCC1 threshold suffix after the “UT.” Insert the reset
timeout delay (Table 2) after “D” to complete the part number.
For example, the MAX6732UTLTD3-T provides a VCC1 threshold
of +4.625V, a VCC2 threshold of +3.075V, and a 210ms reset
timeout period. Sample stock is generally held on standard ver-
sions only (see the Standard Versions table). Standard versions
have an order increment requirement of 2500 pieces.
Nonstandard versions have an order increment requirement of
10,000 pieces. Contact factory for availability.
Typical Operating Circuit and Pin Configurations appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX6732 Datasheet

Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output

No Preview Available !

MAX6732 pdf
Single-/Dual-/Triple-Voltage µP Supervisory
Circuits with Independent Watchdog Output
ABSOLUTE MAXIMUM RATINGS
VCC1, VCC2, RSTIN, MR, WDI to GND .....................-0.3V to +6V
RST, WDO to GND (open drain)...............................-0.3V to +6V
RST, WDO to GND (push-pull) .................-0.3V to (VCC1 + 0.3V)
Input Current/Output Current (all pins) ...............................20mA
Continuous Power Dissipation (TA = +70°C)
6-Pin SOT23-6 (derate 8.7mW/°C above +70°C) ........696mW
8-Pin SOT23-8 (derate 8.9mW/°C above +70°C) ........714mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC1 = VCC2 = +0.8V to +5.5V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Supply Voltage
VCC1,
VCC2
0.8 5.5 V
Supply Current
ICC1
ICC2
VCC1 < +5.5V, all I/O connections
open, outputs not asserted
VCC1 < +3.6V, all I/O connections
open, outputs not asserted
VCC2 < +3.6V, all I/O connections
open, outputs not asserted
VCC2 < +2.75V, all I/O connections
open, outputs not asserted
15 39
10 28
µA
4 11
39
L (falling)
M (falling)
T (falling)
S (falling)
4.500
4.250
3.000
2.850
4.625
4.375
3.075
2.925
4.750
4.500
3.150
3.000
VCC1 Reset Threshold
VTH1
R (falling)
Z (falling)
Y (falling)
W (falling)
2.550
2.250
2.125
1.620
2.625
2.313
2.188
1.665
2.700
2.375
2.250
1.710
V
V (falling)
1.530 1.575 1.620
2 _______________________________________________________________________________________


Part Number MAX6732
Description Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output
Maker Maxim
Total Page 16 Pages
PDF Download
MAX6732 pdf
Download PDF File
MAX6732 pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 MAX6730 Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output Maxim
Maxim
MAX6730 pdf
2 MAX6730A Single-/Dual-/Triple-Voltage uP Supervisory Circuits Maxim Integrated Products
Maxim Integrated Products
MAX6730A pdf
3 MAX6731 Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output Maxim
Maxim
MAX6731 pdf
4 MAX6731A Single-/Dual-/Triple-Voltage uP Supervisory Circuits Maxim Integrated Products
Maxim Integrated Products
MAX6731A pdf
5 MAX6732 Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output Maxim
Maxim
MAX6732 pdf
6 MAX6732A Single-/Dual-/Triple-Voltage uP Supervisory Circuits Maxim Integrated Products
Maxim Integrated Products
MAX6732A pdf
7 MAX6733 Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output Maxim
Maxim
MAX6733 pdf
8 MAX6733A Single-/Dual-/Triple-Voltage uP Supervisory Circuits Maxim Integrated Products
Maxim Integrated Products
MAX6733A pdf
9 MAX6734 Single-/Dual-/Triple-Voltage P Supervisory Circuits with Independent Watchdog Output Maxim
Maxim
MAX6734 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components