http://www.www.datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX1773 Datasheet

Power Source Selector for Dual-Battery Systems

No Preview Available !

MAX1773 pdf
19-1796; Rev 1; 1/03
EVAALVUAAILTAIOBNLEKIT
Power Source Selector for
Dual-Battery Systems
General Description
The MAX1773/MAX1773A highly integrated ICs serve
as the control logic for a system with multiple power
sources. They directly drive external P-channel
MOSFETs to select from an AC adapter and dual bat-
tery sources for charge and discharge. The selection is
made based on the presence of the power sources and
the state of the batteries. The MAX1773/MAX1773A
detect low battery conditions using integrated analog
comparators and check for the presence of a battery
by using battery thermistor outputs.
The MAX1773/MAX1773A are designed for use with a
buck topology charger. They provide a simple and easily
controlled solution to a difficult analog power control prob-
lem. The MAX1773/MAX1773A provide most of the power
source monitoring and selection, freeing the system power
management microprocessor (µP) for other tasks. This not
only simplifies development of the power management
firmware for the µP but also allows the µP to enter standby,
thereby reducing system power consumption.
The MAX1773A is recommended for new designs.
________________________Applications
Notebook and Subnotebook Computers
PDAs and Handy-Terminals
Internet Tablets
Dual-Battery Portable Equipment
Features
o Patented7-MOSFET Topology Offers Low-Cost
Solution
o Automatically Detects and Responds to:
Low Battery Voltage Condition
Battery Insertion and Removal
AC Adapter Presence
o Direct Drive of P-Channel MOSFETs
o Simplifies Power Management µP Firmware
o Extends Battery Life by Allowing Power
Management µP to Enter Standby
o 4.75V to 28V AC Adapter Input Voltage Range
o Integrated LDO with 1mA Drive Capability
o Small Footprint 20-Pin TSSOP Package
Ordering Information
PART
MAX1773EUP
MAX1773AEUP
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
20 TSSOP
20 TSSOP
Pin Configuration appears at end of data sheet.
Covered by U.S. Patent number 5,764,032.
Typical Operating Circuit
AC ADAPTER
INPUT
SYSTEM LOGIC SUPPLY
FROM HOST µP
TO HOST µP
BATSEL
ACPRES
BATSTAT
ACDET
PDS
VDD
MINV
3.3V
BATTERY
A
MAX1773
MAX1773A
EXTLD
THMA
BATA
TCOMP
THMB
BATB
COMA
DISA
CHGA
COMB
DISB
CHGB
3.3V
BATTERY
B
STEP-DOWN
CHARGER
OUTPUT
INPUT
OUTPUT
3.3V DC-DC
CONVERTER
INPUT
SYSTEM LOAD
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX1773 Datasheet

Power Source Selector for Dual-Battery Systems

No Preview Available !

MAX1773 pdf
Power Source Selector for
Dual-Battery Systems
ABSOLUTE MAXIMUM RATINGS
VBATA, VBATB to GND ............................................-0.3V to +20V
VCOMA to GND........................................-0.3V to (VBATA + 0.3V)
VCOMB to GND........................................-0.3V to (VBATB + 0.3V)
VCHGA, VCHGB, VEXTLD, VACDET to GND ..............-0.3V to +30V
VPDS, VDISA, VDISB to GND ...................-0.3V to (VEXTLD + 0.3V)
VDD, VBATSEL, V ACPRES, VBATSTAT, VTCOMP,
VMINV to GND.......................................................-0.3V to +6V
VTHMA, VTHMB (Note 1)............................................ -0.3V to +6V
Continuous Current out of THMA, THMB............................20mA
I ACPRES, IBATSTAT Sink Current..........................................30mA
Continuous Power Dissipation (TA = +70°C)
20-Pin TSSOP (derate 7.0mW/°C above +70°C) ........560mW
Operating Temperature ......................................-40°C to +85°C
Storage Temperature ........................................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on THMA and THMB below -0.3V are clamped by internal diodes limit forward diode current to maximum continuous current. When voltage
on these pins is below -0.3V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VBATA = VBATB = 16.8V, CVDD = 3.3µF, VMINV = 0.93V, VEXTLD = VACDET = 28V, VTCOMP = 3V, VTHMA = VTHMB = 1.65V,
VBATSEL = 0, CCOMA = CCOMB = CDISA = CDISB = CCHGA = CCHGB = CPDS = 5nF, TA = 0°C to +85°C, unless otherwise noted.)
PARAMETER
CONDITIONS
MIN TYP MAX UNITS
EXTLD Supply Voltage Range
BATA, BATB Supply Voltage Range
VEXTLD > VBATA and VBATB
4.75
4.75
28.00
19.00
V
V
BATA, BATB Quiescent Current
(Current from the higher voltage supply)
BATA, BATB Quiescent Current
(Current from the lower voltage supply)
VBATA = 4.75V to 19V,
VBATB = 4.75V to 19V,
IVDD = 0
VBATA = 4.75V to 19V,
VBATB = 4.75V to 19V,
IVDD = 0
VACDET = 28V
VACDET = 2.2V to
VBATA and VBATB
VACDET = 28V
VACDET = 2.2V to
VBATA and VBATB
58
µA
40 70
58
µA
8 13
EXTLD Quiescent Current
VACDET = 28V, VEXTLD = 28V
VACDET= 2.2V to VBATA and VBATB,
VEXTLD = 16V
35 55
µA
58
LINEAR REGULATOR
VDD Output Voltage
VDD Power-Supply Rejection Ratio
IVDD = 0 to 100µA
IVDD = 100µA to 1mA
VBATA or VBATB = 5V to 19V, VEXTLD = 5V
VBATA = VBATB = 5V, VEXTLD = 5V to 28V
VBATA, VBATB, or VEXTLD = 5V to 19V,
sawtooth at 10V/µs, other supplies = 12V
3.234 3.3 3.367
3.168 3.3 3.432
V
1.0
1.0
mV/V
1
VDD Undervoltage Lockout
COMPARATORS
Hysteresis is typically 50mV
2.0 2.5 3.0
V
TCOMP Undervoltage Lockout
(Note 2)
0 1.1 V
THM_ Input Voltage Range
0 5.5 V
THM_ Input Leakage Current
TCOMP Input Voltage Range
VTHM_ = 5.5V
0.1 100 nA
VTHMA = VTHMB = 0 to 5.5V
0 5.5
VTHMA = VTHMB = 0 to 5.5V, VBATA = VBATB
= VEXTLD = 4.75V
0
V
4.3
2 _______________________________________________________________________________________


Part Number MAX1773
Description Power Source Selector for Dual-Battery Systems
Maker Maxim
Total Page 20 Pages
PDF Download
MAX1773 pdf
MAX1773 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 MAX177 CMOS 10-Bit A/D Converter with Track-and-Hold Maxim
Maxim
MAX177 pdf
2 MAX1771 Step-Up DC-DC Controller Maxim
Maxim
MAX1771 pdf
3 MAX17710 Energy-Harvesting Charger and Protector Maxim Integrated
Maxim Integrated
MAX17710 pdf
4 MAX1772 Low-Cost / Multichemistry Battery- Charger Building Block Maxim
Maxim
MAX1772 pdf
5 MAX1773 Power Source Selector for Dual-Battery Systems Maxim
Maxim
MAX1773 pdf
6 MAX1774 Dual / High-Efficiency / Step-Down Converter Maxim
Maxim
MAX1774 pdf
7 MAX1775 Dual-Output Step-Down DC-DC Converter for PDA/Palmtop Computers Maxim
Maxim
MAX1775 pdf
8 MAX1776 24V / 600mA Internal Switch / 100% Duty Cycle / Step-Down Converter Maxim
Maxim
MAX1776 pdf
9 MAX17761 Synchronous Step-Down DC-DC Converter Maxim Integrated
Maxim Integrated
MAX17761 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy