Description | Kemet Capacitors KEMET WET TANTALUM CAPACITORS Wet tantalum capacitors are usually applied in circuits where the AC component is small compared to the DC component. Typical uses known to KEMET Electronics include blocking, by-passing, decopling, and filtering. They are also used in timing circuits. If two of these capacitors are connected “back-to-back” (i.e., negative-to-negaive or positive-to-po... |
Features |
of multilayer ceramic caps (low ESR and high frequency cap retention), aluminum electrolytics (benign failure mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, and no wearout mechanism). The KO-CAP can reduce component counts, eliminate through-hole assembly by replacing cumbersome leaded aluminum capacit...
|
Datasheet | T198B277K025AS Datasheet - 298.95KB |