http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf



Intersil Electronic Components Datasheet

ICL7135 Datasheet

41/ Digit/ BCD Output/ A/D Converter

No Preview Available !

ICL7135 pdf
®
Data Sheet
41/2 Digit, BCD Output, A/D Converter
The Intersil ICL7135 precision A/D converter, with its
multiplexed BCD output and digit drivers, combines dual-
slope conversion reliability with ±1 in 20,000 count accuracy
and is ideally suited for the visual display DVM/DPM market.
The 2.0000V full scale capability, auto-zero, and auto-
polarity are combined with true ratiometric operation, almost
ideal differential linearity and true differential input. All
necessary active devices are contained on a single CMOS
lC, with the exception of display drivers, reference, and a
clock.
The ICL7135 brings together an unprecedented combination
of high accuracy, versatility, and true economy. It features
auto-zero to less than 10μV, zero drift of less than 1μV/oC,
input bias current of 10pA (Max), and rollover error of less
than one count. The versatility of multiplexed BCD outputs is
increased by the addition of several pins which allow it to
operate in more sophisticated systems. These include
STROBE, OVERRANGE, UNDERRANGE, RUN/HOLD and
BUSY lines, making it possible to interface the circuit to a
microprocessor or UART.
Ordering Information
PART
NUMBER
PART
MARKING
TEMP.
RANGE
(°C)
PACKAGE
PKG.
DWG. #
ICL7135CPI ICL7135CPI 0 to +70 28 Ld PDIP
E28.6
ICL7135CPIZ ICL7135CPIZ 0 to +70 28 Ld PDIP
E28.6
(Note 1)
(Pb-free) (Note 2)
NOTES:
1. Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and
100% matte tin plate termination finish, which are RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the
Pb-free requirements of IPC/JEDEC J STD-020.
2. Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
August 28, 2007
ICL7135
FN3093.4
Features
• Accuracy Guaranteed to ±1 Count Over Entire ±20000
Counts (2.0000V Full Scale)
• Guaranteed Zero Reading for 0V Input
• 1pA Typical Input Leakage Current
• True Differential Input
• True Polarity at Zero Count for Precise Null Detection
• Single Reference Voltage Required
• Overrange and Underrange Signals Available for Auto-
Range Capability
• All Outputs TTL Compatible
• Blinking Outputs Gives Visual Indication of Overrange
• Six Auxiliary Inputs/Outputs are Available for Interfacing to
UARTs, Microprocessors, or Other Circuitry
• Multiplexed BCD Outputs
Pb-Free Plus Anneal Available (RoHS Compliant)
Pinout
ICL7135
(PDIP)
TOP VIEW
V- 1
REFERENCE 2
NALOG COMMON 3
INT OUT 4
AZ IN 5
BUFF OUT 6
REF CAP - 7
REF CAP + 8
IN LO 9
IN HI 10
V+ 11
(MSD) D5 12
(LSB) B1 13
B2 14
28 UNDERRANGE
27 OVERRANGE
26 STROBE
25 R/H
24 DIGITAL GND
23 POL
22 CLOCK IN
21 BUSY
20 (LSD) D1
19 D2
18 D3
17 D4
16 (MSB) B8
15 B4
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.



Intersil Electronic Components Datasheet

ICL7135 Datasheet

41/ Digit/ BCD Output/ A/D Converter

No Preview Available !

ICL7135 pdf
Typical Application Schematic
SET VREF = 1.000V
VREF IN
100kΩ
ANALOG
GND
-5V
100kΩ
SIGNAL
INPUT
0.47μF
27Ω
1μF
100kΩ
1μF
100K
0.1μF
+5V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ICL7135
ICL7135
28
CLOCK IN
120kHz
27
26
25
24
0V ANODE
DRIVER
23 TRANSISTORS
22 6
21
20
19
18
17
16
15
SEVEN
SEG.
DECODE
DISPLAY
2 FN3093.4



Intersil Electronic Components Datasheet

ICL7135 Datasheet

41/ Digit/ BCD Output/ A/D Converter

No Preview Available !

ICL7135 pdf
ICL7135
Absolute Maximum Ratings
Supply Voltage V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6V
V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -9V
Analog Input Voltage (Either Input) (Note 1) . . . . . . . . . . . . V+ to V-
Reference Input Voltage (Either Input) . . . . . . . . . . . . . . . . V+ to V-
Clock Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to V+
Operating Conditions
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to +70oC
Thermal Information
Thermal Resistance (Typical, Note 2) . . . . . . . . . . . . . θJA (oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . .+150oC
Maximum Storage Temperature Range . . . . . . . . -65oC to +150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . .+300oC
NOTE: Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Input voltages may exceed the supply voltages provided the input current is limited to +100μA.
2. θJA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications V+ = +5V, V- = -5V, TA = +25oC, fCLK Set for 3 Readings/s, Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNITS
ANALOG (Notes 3, 4)
Zero Input Reading
Ratiometric Error (Note 4)
Linearity Over ± Full Scale (Error of Reading from Best Straight Line)
Differential Linearity (Difference Between Worse Case Step of
Adjacent Counts and Ideal Step)
VlN = 0V, VREF = 1.000V
VlN = VREF = 1.000V
-2V VIN +2V
-2V VIN +2V
-00000
-3
-
-
+00000
0
0.5
0.01
+00000
+3
1
-
Counts
Counts
LSB
LSB
Rollover Error (Difference in Reading for Equal Positive and
Negative Voltage Near Full Scale)
-VlN +VlN 2V
- 0.5 1 LSB
Noise (Peak-to-Peak Value Not Exceeded 95% of Time), eN
Input Leakage Current, IILK
Zero Reading Drift (Note 7)
Scale Factor Temperature Coefficient, TC (Notes 5 and 7)
VlN = 0V, Full scale = 2.000V - 15 -
μV
VlN = 0V
VlN = 0V, 0oC to +70oC
VExlNt. =R+e2f.V0,p0pomC/otoC +70oC
- 1 10 pA
- 0.5 2 μV/oC
- 2 5 ppm/×oC
DIGITAL INPUTS
Clock In, Run/Hold (See Figure 2)
DIGITAL OUTPUTS
VINH
VINL
IINL
IINH
VIN = 0V
VIN = +5V
2.8 2.2
-
- 1.6 0.8
- 0.02 0.1
- 0.1 10
V
V
mA
μA
All Outputs, VOL
B1, B2, B4, B8, D1, D2, D3, D4, D5, VOH
BUSY, STROBE, OVERRANGE, UNDERRANGE, POLARITY, VOH
SUPPLY
IOL = 1.6mA
IOH = -1mA
IOH = -10μA
- 0.25 0.40
2.4 4.2
-
4.9 4.99
-
V
V
V
+5V Supply Range, V+
+4 +5 +6
V
-5V Supply Range, V-
-3 -5 -8
V
+5V Supply Current, I+
-5V Supply Current, I-
Power Dissipation Capacitance, CPD
CLOCK
fC = 0
fC = 0
vs Clock Frequency
-
1.1 3.0
mA
-
0.8 3.0
mA
- 40 -
pF
Clock Frequency (Note 6)
DC 2000 1200
kHz
NOTES:
3. Tested in 41/2 digit (20.000 count) circuit shown in Figure 3. (Clock frequency 120kHz.)
4. Tested with a low dielectric absorption integrating capacitor, the 27Ω INT OUT resistor shorted, and RlNT = 0. See Component Value Selection Discussion.
5. The temperature range can be extended to +70oC and beyond as long as the auto-zero and reference capacitors are increased to absorb the higher
leakage of the ICL7135.
6. This specification relates to the clock frequency range over which the lCL7135 will correctly perform its various functions See “Max Clock Frequency”
section for limitations on the clock frequency range in a system.
7. Parameter guaranteed by design or characterization. Not production tested.
3 FN3093.4




Part Number ICL7135
Description 41/ Digit/ BCD Output/ A/D Converter
Maker Intersil
Total Page 15 Pages
PDF Download
ICL7135 pdf
Download PDF File
ICL7135 pdf
View for Mobile






Related Datasheet

1 ICL7134 14-Bit Multiplying Microprocessor-Compatible D/A Converter Intersil
Intersil
ICL7134 pdf
2 ICL7135 41/ Digit/ BCD Output/ A/D Converter Intersil
Intersil
ICL7135 pdf
3 ICL7135 4 Digit A/D Converter with Multiplexed BCD Outputs Maxim
Maxim
ICL7135 pdf
4 ICL7135C 4 1/2-Digit Precision Analog-to-Digital Converters (Rev. D) Texas Instruments
Texas Instruments
ICL7135C pdf
5 ICL7136 31/2 Digit LCD/LED/ Low Power Display/ A/D Converters with Overrange Recovery Intersil
Intersil
ICL7136 pdf
6 ICL7136 Low Power/ 3 Digit A/D Converter Maxim
Maxim
ICL7136 pdf
7 ICL7137 (ICL7136 / ICL7137) Digit LCD/LED - Low Power Display - A/D Converters Intersil
Intersil
ICL7137 pdf
8 ICL7137 Digital A/D Converter Maxim
Maxim
ICL7137 pdf
9 ICL7139 (ICL7139 / ICL7149) 33/4 Digit Autoranging Multimeter Intersil Corporation
Intersil Corporation
ICL7139 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components