http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




InnovASIC
InnovASIC

IA82510 Datasheet Preview

IA82510 Datasheet

ASYNCHRONOUS SERIAL CONTROLLER

No Preview Available !

IA82510 pdf
www.DataSheet4U.com
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
Data Sheet
As of Production Ver. 01
FEATURES
Form, Fit, and Function Compatible with the Intel® 82510
Packaging options available: 28 Pin Plastic or Ceramic DIP, 28 Pin Plastic
Leaded Chip Carrier, 28 Pin Ceramic Leadless Chip Carrier
Asynchronous Serial Channel Operation
Separate Transmit and Receive FIFOs with Programmable Threshold
Programmable Baud Rate Generators up to 288K Baud
Special Protocol Features
- Control Character Recognition
- Auto Echo and Loopback Modes
- 9-Bit Protocol Support
- 5 to 9 Bit Character Format
The IA82510 is a "plug-and-play" drop-in replacement for the original IC. innovASIC produces replacement ICs
using its MILESTM, or Managed IC Lifetime Extension System, cloning technology. This technology produces
replacement ICs far more complex than "emulation" while ensuring they are compatible with the original IC.
MILESTM captures the design of a clone so it can be produced even as silicon technology advances. MILESTM
also verifies the clone against the original IC so that even the "undocumented features" are duplicated. This data
sheet documents all necessary engineering information about the IA82510 including functional and I/O
descriptions, electrical characteristics, and applicable timing.
Package Pinout
D4
D5
D6
D7
INT
TXD
VSS
X2 or OUT2n
X1 or CLK
SCLK or RIn
DSRn or TA or OUT0n
DCDn or ICLK or OUT1n
RXD
CTSn
IA82510
(1) (28)
(2) 28 Pin DIP (27)
(3) (26)
(4) (25)
(5) (24)
(6) (23)
(7) (22)
(8) (21)
(9) (20)
(10) (19)
(11) (18)
(12) (17)
(13) (16)
(14) (15)
D3
D2
D1
D0
A2
A1
A0
VDD
RDn
WRn
CSn
INT
TXD
VSS
X2 or OUT2n
X1 or CLK
SCLK or RIn
DSRn or TA or OUT0n
RESET
RTSn
DTRn or TB
D7 D6 D5 D4 D3 D2 D1
(4) (3) (2) (1) (28) (27) (26)
(5)
(6)
(7) IA82510
(8)
28 Pin LCC
(9)
(10)
(11)
(25)
(24)
(23)
(22)
(21)
(20)
(19)
(12) (13) (14) (15) (16) (17) (18)
D0
A2
A1
A0
VDD
RDn
WRn
Copyright © 2001
innovASIC
The End of Obsolescence
ENG211001219-01
Page 1 of 14
www.innovasic.com
Customer Support:
1-888-824-4184




InnovASIC
InnovASIC

IA82510 Datasheet Preview

IA82510 Datasheet

ASYNCHRONOUS SERIAL CONTROLLER

No Preview Available !

IA82510 pdf
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
Data Sheet
As of Production Ver. 01
DESCRIPTION
The IA82510 is an asynchronous serial controller that provides a CPU interface to one transmit
and one receive channel. It is Form, Fit, and Function compatible with the Intel 82510.
Configuration registers are used to control the serial channel, interrupts, and modes of operation.
The CPU controls this device via address and data lines with read/write control. The CPU also
uses this interface to read and write data to receive and transmit data through the serial channel.
FIFOs and various serial modes can be used to help off-load the CPU from transmitting and
receiving data. An interrupt line provides an indication to the CPU that the device requires
servicing. The device can be configured for 8250A/16450 compatibility.
Functional Block Diagram
A(2:0)
D(7:0)
RDn
WRn
CSn
INT
RESET
BUS INTERFACE
(Reset Logic,
Registers,
Interrupt Generation,
TIMING
(Baud Rate
Generators A & B,
Clocking
IA82510
TRANSMITTER
RECEIVER
CONFIG., STATUS, RXDATA
TXDATA
MODEM
TXD
PIN
CONFIGURATION
RXD
CTSn
RTSn
DSRn or TA or OUT0n
DCDn or ICLK or OUT1n
DTRn or TB
X1 or CLK
X2 or OUT2n
SCLK or RIn
Copyright © 2001
innovASIC
The End of Obsolescence
ENG211001219-01
Page 2 of 14
www.innovasic.com
Customer Support:
1-888-824-4184




InnovASIC
InnovASIC

IA82510 Datasheet Preview

IA82510 Datasheet

ASYNCHRONOUS SERIAL CONTROLLER

No Preview Available !

IA82510 pdf
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
Data Sheet
As of Production Ver. 01
Functional Overview
Transmitter
The Transmit function consists of a 4 × 11 bit FIFO, and a Transmit Engine. The 4 × 11 FIFO is
configurable as any depth between one and four words inclusive. The transmit engine is
responsible for reading the data out of the FIFO and placing it in the proper order on the TXD pin.
The transmit engine is highly configurable to be compatible with numerous formats, including
16450 and 8250 modes of communication. Transmit Communication parameters that can be
programmed include:
Parity modes
Stop Bits
Character Length
FIFO Depth
Clocking Options
RTS and CTS modes
See the Register Description for more details.
Receiver
The Receiver function consists of a 4 × 11 configurable FIFO and a Receive Engine. The receive
engine is responsible for sampling the data on the RXD input pin, formatting the data, and placing
the data in the FIFO. The receive engine is highly configurable with parameters that include:
Parity modes
Stop Bits
Character Length
FIFO Depth
Clocking Options
Address Matching Options
Control Character Detection
RTS and CTS modes
See the Register Description for more details.
Bus Interface
The Bus Interface is a simple interface that allows a micro-processor or micro-controller to read
and write the IA82510 Registers. It consists of the following I/O lines:
A0, A1, A2 : 3 Bit Address
D0-D7 :
8 Bit Data
RDn:
Active Low Read Enable
WRn:
Active Low Write Enable
CSn:
Active Low Chip Select
INT:
Interrupt Output
RESET:
Chip Reset
Copyright © 2001
innovASIC
The End of Obsolescence
ENG211001219-01
Page 3 of 14
www.innovasic.com
Customer Support:
1-888-824-4184




Part Number IA82510
Description ASYNCHRONOUS SERIAL CONTROLLER
Maker InnovASIC
Total Page 14 Pages
PDF Download
IA82510 pdf
Download PDF File
IA82510 pdf
View for Mobile






Related Datasheet

1 IA8251 Programmable Communication Interface InnovASIC
InnovASIC
IA8251 pdf
2 IA82510 ASYNCHRONOUS SERIAL CONTROLLER InnovASIC
InnovASIC
IA82510 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components