http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Emerson
Emerson

IBC60AQN4896-REJ Datasheet Preview

IBC60AQN4896-REJ Datasheet

DC-DC / Intermediate Bus Converter

No Preview Available !

IBC60AQN4896-REJ pdf
Embedded Power for
Business-Critical Continuity
Quarter-Brick
Series
Fixed Ratio 2nd
Generation IBC
Total Power: 600W
Input Voltage: 38 - 55VDC
Rev. 03.31.09_162
Quarter-Brick Fixed IBC60
 of 4
Special Features
• 48 V input with isolated 9.6 V
output
• Ultra-high efficiency, 97%
• Unprecedented usable output
power levels
• High power density open-frame
technology
• Wide operating ambient
temperature range
• DOSA quarter-brick high
current footprint and pinout
• Low profile, 0.48” (12.2 mm)
• Meets basic insulation
requirements of EN60950-1
• Remote ON/OFF and
overtemperature protection
• RoHS compliant
• 2 Year Warranty
Safety
• UL/cUL : CAN/CSA 22.2
No. 60950-1 : UL60950-1
File No. E135734
• VDE File No. 10401-3336-0206
Licence No. 40012752
Electrical Specifications
Input
Input voltage ra­nge:
Input current:
Input current (max.):
Input reflected ripple:
Remote ON/OFF
Logic compatibility
ON
OFF:
Undervoltage lockout:
Start-up time:
(See Note 3)
Remote OFF
(See Note 1)
(See Note 4)
Power up
Power down
Power up
Remote ON/OFF
38-55 Vdc
6.5 mA typ.
13 A max. @ lo max.
and Vin = min. rated
1200 mA (pk-pk)
35 mA rms
(See Note 6)
Open collector ref. to -Input
> 2.4 Vdc
< 0.4 Vdc
34.5 V
33 V
11rms
2 rms
Output
Line regulation:
Load regulation:
Low line to high line
Full load to min. load
See table
See Table
Total error band:
Vin = 38 V to 55 V
(including setpoint, line, load and temperature)
Minimum load:
Overshoot:
At turn-on and turn-off
7.0 - 11.0 Vdc
0A
None
Undershoot:
None
Ripple and Noise:
5-20 MHz
(See Note 2)
100 mV pk-pk typ.
20 mV rms typ.
All specifications are typical at nominal input, full load at 25 °C ambient unless otherwise stated




Emerson
Emerson

IBC60AQN4896-REJ Datasheet Preview

IBC60AQN4896-REJ Datasheet

DC-DC / Intermediate Bus Converter

No Preview Available !

IBC60AQN4896-REJ pdf
Embedded Power for
Business-Critical Continuity
Electrical Specifications Continued
EMC Characteristics
Immunity:
ESD air enclosure:
Input transients:
General Specifications
Efficiency:
Basic insulation:
Switching frequency:
Approvals and (Pending) standards:
Material flammability:
Weight:
MTBF representative model:
Protection:
Short-circuit
Overvoltage:
Thermal
EN61000-4-2 8 kV, 6 kV
Input voltage
> 59 V
> 60 V
> 62 V
Input/output
Fixed
(See Note 5)
Telcordia Tech SR-332
48 Vin, 40 ˚C, 50% load
ground benign
(See Note 9)
Air, contact
Duration before shutdown
2 Seconds
1 Second
0 Seconds
97%
2250 Vdc
340 kHz typ.
EN60950-1 VDE
UL/cUL60950-1
UL94V-0
59 g (2.08 oz)
TBD hours
Hiccup
Non-latching
140 ˚C hot spot
Environmental Specifications
Thermal Performance:
Operating ambient temperature -40 ˚C - +85 ˚C
Non-operating
-55 ˚C to +125 ˚C
Rev. 03.31.09_162
Quarter-Brick Fixed IBC60
 of 4




Emerson
Emerson

IBC60AQN4896-REJ Datasheet Preview

IBC60AQN4896-REJ Datasheet

DC-DC / Intermediate Bus Converter

No Preview Available !

IBC60AQN4896-REJ pdf
Embedded Power for
Business-Critical Continuity
Ordering Information
Ordering Information
Output
Power
(Max.)
642 W
Input Output
Voltage Voltage
38-55 Vdc 9.6 V
Output
Current
(min.)
0A
Output
Current
max.)
60 A
Efficiency
(typ)
97%
Set Point
Accuracy
--
Regulation
Line %
32.5%
Load %
2.5%
Rev. 03.31.09_162
Quarter-Brick Fixed IBC60
 of 4
Model Numbers
IBC60AQN4896J
Part Number System with Options
IBC 60A Q N4896-RENJ
Product Family
IBC = Intermediate Bus Converter
2nd Generation
Rated Output Current
60 A = 60 Amps at 48 V
Form Factor
Q = Quarter-Brick
Input Voltage Type
T = Narrow Input Fixed Ratio
S = Narrow Input Semi-reguated
N = Narrow Telecom Fixed Ratio
W = Wide Telecom Semi-reguated
RoHS Compliance
J = Pb-free (RoHS 6/6 compliant)
Pin Length Options
Blank = 0.188 ” (4.78 mm)
N = 0.145 ” (3.68 mm)
K = 0.110 ” (2.79 mm)
Package, Body Height
E = Open-Frame, 0.49 in (12.48 mm)
Remote ON/OFF Logic
Blank = Positive
R = Negative (See Note 6)
Output Voltage
96 = 9.6 V
Input Voltage
48 = 48 V
Notes
1 Recommended input fusing is a 20 A HRC 250 V rated fuse.
2 Measured with external filter. See Application Note 209 for details.
3 Start-up into resistive load.
4 Peak to peak measured without external Pi filter. Significant reduction
possible with external filter. See Application Note 209 for details.
5 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
6 Active-low remote ON/OFF option is also available. Please add the suffix ‘-R’
to the part number, e.g. IBC60AQN4896-REJ.
7 Maximum output power at maximum input voltage.
8 Efficiency at 100% maximum output voltage.
9 After an input overvoltage latch off, the input voltage must be returned to 55
V or lower for unit to restart.
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.




Part Number IBC60AQN4896-REJ
Description DC-DC / Intermediate Bus Converter
Maker Emerson
Total Page 4 Pages
PDF Download
IBC60AQN4896-REJ pdf
Download PDF File
IBC60AQN4896-REJ pdf
View for Mobile






Related Datasheet

1 IBC60AQN4896-REJ DC-DC / Intermediate Bus Converter Emerson
Emerson
IBC60AQN4896-REJ pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components