EL1502C - Product Brief
High Power Differential Line Driver/Receiver
• Complete ADSL differential driver
• 54VP-P output drive into 100Ω
• 50VP-P output drive into 50Ω
• Driver 2nd/3rd harmonics of
-70dBc/-75dBc at 2VP-P into 100Ω
• Low supply current - 12.5mA per
drive amplifier and 5mA per
• Standard surface-mount package
• ADSL line driver
• HDSL2 line driver
• Video distribution amplifier
Tape & Reel
The EL1502C is a complete transceiver solution for high speed data
transmission over twisted pair wires. It contains two wideband, high-
voltage drivers and two low-noise receive amplifiers. The EL1502C is
ideally suited for both ADSL and HDSL2 applications, in which it can
supply a 50VP-P signal into a 50Ω differential load while exhibiting
very low distortion. The receive amplifiers also have very low distor-
tion and low-noise for superior reception of small signals.
The line drivers of the EL1502C are current-feedback type amplifiers,
which achieve a high slew rate while consuming moderate power.
They retain their frequency response over a wide range of externally
set gains. The receive amplifiers are of the voltage-feedback type and
can be used to implement a hybrid coupler or filter functions using
external passive components.
The EL1502C operates on ±5V to ±15V supplies. It retains its band-
width and linearity over the complete supply range.
The device is supplied in a standard form factor, 20-pin SOIC pack-
age. The eight center package pins of the package are used as ground
connections and heat spreaders, allowing for operation over the full --
-40°C to +85°C temperature range.
20-Pin Wide Body SOIC
* Gnd pins are heat spreaders
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.