http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




ETC
ETC

L1581D-2.5 Datasheet Preview

L1581D-2.5 Datasheet

Dual Input Ultra Low Dropout Voltage Regulator (ULDO)

No Preview Available !

L1581D-2.5 pdf
NIKO-SEM
Dual Input Ultra Low Dropout
Voltage Regulator (ULDO)
L1581 Series
TO-252
GENERAL DESCRIPTION
The L1581 is a positive and very low
dropout voltage regulator with 5A output
current capability. When supplying 2.5V or
2.8V on Motherboards or VGA Card where
both 5V and 3.3V supplies are available,
the superior dropout characteristics of the
L1581 result in reduced heat dissipation
compared to regular LDOs, thus allowing
heat sink reduction. The adjustable version
requires only two external resistors to set
the output. The L1581 features a low
dropout of less than 600mV and offers fast
transient response, remote sense, internal
limiting, thermal shutdown and safe
operating area protection of the output
device.
The L1581 is a five terminal adjustable
voltage regulator available in the popular 5
pin TO-252 packages.
FEATURES
z Low dropout voltage 600mV at rated load
current
z Remote sense operation
z Fast transient response
z 0.5% voltage reference initial accuracy
z Standard 5 terminal, Low cost TO-252
packages
APPLICATIONS
z 3.3V to 2.8V or 2.5V for Motherboards or
VGA Card
z Spilt plane microprocessor supplies
z Post regulator for switching supplies
TYPICAL APPLICATION
Adjustable Output Parts(2)
Vin
Vctrl
C1
330uF
C2
10uF
L1581X
5 Vin
4 CTR'L
OUT 3
SENSE 1
Vref
R1
Iadj
C3
0.033uF
R2
Vout
C4
330uF
Vo = Vref (1+R2/R1) + Iadj x R2
1 OCT-11-Y02




ETC
ETC

L1581D-2.5 Datasheet Preview

L1581D-2.5 Datasheet

Dual Input Ultra Low Dropout Voltage Regulator (ULDO)

No Preview Available !

L1581D-2.5 pdf
NIKO-SEM
Dual Input Ultra Low Dropout
Voltage Regulator (ULDO)
L1581 Series
TO-252
Fixed Output Parts
Vin
Vctrl
C1
330uF
C2
10uF
L1581X-2.5
5 Vin
OUT 3
4 CTR'L
SENSE 1
2.5V Vout
C4
330uF
Vin
Vctrl
C1
330uF
C2
10uF
L1581X-3.3
5 Vin
OUT 3
4 CTR'L
SENSE 1
3.3V Vout
C4
330uF
NOTES :
(1) If the same voltage is input to both INPUT and CONTROL, then the dropout voltage will become 1.3V
maximum.
(2) A small (~0.033uF) capacitor can be used to bypass the ADJUST pin to improve transient response, if needed.
(3) Capacitor values are for reference only. Good quality, low ESR tantalum or aluminum electrolytic capacitors
should be used. Increasing the value of the output capacitor will improve the overall transient response.
2 OCT-11-Y02




ETC
ETC

L1581D-2.5 Datasheet Preview

L1581D-2.5 Datasheet

Dual Input Ultra Low Dropout Voltage Regulator (ULDO)

No Preview Available !

L1581D-2.5 pdf
NIKO-SEM
Dual Input Ultra Low Dropout
Voltage Regulator (ULDO)
L1581 Series
TO-252
ABSOLUTE MAXIMUM RATINGS
z Input Supply Voltage, VIN
Control Input Voltage, VCTRL
z Power Dissipation, PD
z Thermal Resistance
Junction to Case, θJC
z Thermal Resistance
Junction to Ambient, θJA
7V
13.2V
Internally
Limited
3 °C/W
60 °C/W
z Operating Junction
Temperature Range, TJ
z Storage Temperature
Range, TSTG
z Lead Temperature, TLEAD
(Soldering, 10 Seconds)
0 to 125 °C
-40 to 150 °C
260 °C
ELECTRICAL CHARACTERISTICS (Unless otherwise specified, Vout = Vsns , Vadj = 0V ,
Cctl = Cin= Cout =10 uF,TJ = 25 °C)
Parameter
Symbol
Test Conditions
Typical
Limits
Reference Voltage(1)
(Adj. Voltage
Versions)
Dropout Voltage(1) (2)
Minimum VIN
Output Voltage(1)
(Fixed Voltage
Versions)
Line Regulation(1)
Load Regulation
VREF
VI - VO
ŠVCTRL=4.5V, VIN=2.05V, IOUT=10mA
Š1.237V~1.263V
ŠVCTRL = 4.5V, 10mA < IOUT < 5A, 1.25V Š1.231V~1.269V
VIN = 2.05V
VCTRL = 4.75V, IOUT = 5A
0.54V 0.62V (Max)
VOUT
ŠVCTRL = 5V, VIN = VOUT 0.8V,
IOUT=10mA
ŠVCTRL = 5V, 10mA < IOUT < 5A,
VIN = VOUT 0.8V
REG(LINE)
VCTRL = 4.5V to 12V,
0.8V) to 5.5V, IOUT =
VIN = (VOUT
10mA
REG(LOAD)
VCTRL = 4.5V, VIN =
IOUT = 10mA ~ 5A
(VOUT0.8V)
,
VOUT
1.0mV
1.0mV
± 1%
± 1.5%
3.0mV
5.0mV
Thermal Regulation(6) REG(Thermal)
0.002 0.02% / W
Minimum Load
Current(4)
Adjust Pin Current
Control Pin Current(3)
Current Limit
IO
IADJ
ICTRL
ICL
VCTRL = 5V, VIN = VOUT0.8V
VCTRL = 4.5V, VIN = VOUT0.8V,
IOUT = 10mA
VCTRL = 4.5V, VIN = VOUT0.8V,
IOUT = 5A
VCTRL = 4.5V, VIN = VOUT0.8V
ΔVOUT = 100mV
%/W
5mA
50µA
33mA
10mA
120µA
120mA
5.1A (Min)
3 OCT-11-Y02




Part Number L1581D-2.5
Description Dual Input Ultra Low Dropout Voltage Regulator (ULDO)
Maker ETC
Total Page 6 Pages
PDF Download
L1581D-2.5 pdf
Download PDF File
L1581D-2.5 pdf
View for Mobile






Related Datasheet

1 L1581D-2.5 Dual Input Ultra Low Dropout Voltage Regulator (ULDO) ETC
ETC
L1581D-2.5 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components