http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





ETC
ETC

H15234 Datasheet Preview

H15234 Datasheet

EASTMAN Fine Grain Duplicating Panchromatic Negative Film 2234/ 3234/ 5234/ 7234

No Preview Available !

H15234 pdf
TECHNICAL DATA / BLACK-AND-WHITE INTERMEDIATE FILM
March 2004 H-1-5234t
EASTMAN Fine Grain Duplicating
Panchromatic Negative Film 2234,
3234, 5234, 7234
EASTMAN Fine Grain Duplicating Panchromatic Negative
Film 5234/7234 and EASTMAN Fine Grain Duplicating
Panchromatic Negative Film 2234/3234, ESTAR Base, are
characterized by very high sharpness. They have
panchromatic sensitivity. These low-speed, black-and-white
films are designed for making duplicate negatives from
master positives, or internegatives from reversal originals.
When used with EASTMAN Fine Grain Duplicating
Positive Film 5366/7366, they produce negatives nearly
equal to the original negative in tone rendering and printing
detail.
BASE
5234/7234 Film has a gray acetate safety base. The back side
of the base contains an anti-static layer with a carnauba wax
lubricant.
2234/3234 Film has a gray ESTAR (polyester) base. The
backside of the base contains a process-surviving anti-static
layer.
DARKROOM RECOMMENDATIONS
Use a KODAK No. 3 Safelight Filter / dark green, with a
15-watt bulb, no closer to the film than 1.2 metres (4 feet).
STORAGE
Store unexposed film at 13°C (55°F) or lower. For extended
storage, store at -18°C (0°F) or lower. Process exposed film
promptly. Store processed film according to the
recommendations in ANSI/PIMA IT9.11-1998: for
medium-term storage (minimum of ten years), store at 25°C
(77°F) or lower at a relative humidity of 20 to 50 percent; for
extended-term storage (for preservation of material having
permanent value), store at 21°C (70°F) or lower at a relative
humidity of 20 to 30 percent. For active use, store at 25°C
(77°F) or lower, at a relative humidity of 50 +/- 5 percent.
This relates to optimized film handling rather than
preservation; static, dust-attraction and curl-related
problems are generally minimized at the higher relative
humidity. After usage, the film should be returned to the
appropriate medium- or long-term storage conditions as
soon as possible.
For more information about medium- and long-term
storage, see ANSI/PIMA IT9.11-1998, SMPTE
RP131-1998, and KODAK Publications No. H-1, KODAK
Motion Picture Film, and No. H-23, The Book of Film Care.
PROCESSING
The following process recommendations should be used as
starting points for most conventional continuous-immersion
processors with solutions prepared according to the formulas
in KODAK Publication No.H-24.15, Manual for Processing
KODAK Motion Picture Films, Module 15. The processing
times may require modification for a particular machine.
Note: Observe precautionary information on product labels
and on the Material Safety Data Sheets.
Processing
Step
KODAK
Developer
D-961
Stop Rinse3
KODAK Fixing
Bath
F-51
Wash
(counter-current)
Dry
Temperature Time
70 +-1/2 F
(21 +-0.3 C)
-2
70 +-2 F
(21 +-1 C)
50 sec
70 +-2 F
(21 +-1 C)
6 min
70 +-2 F
(21 +-1 C)
95 F (35 C)
10 min
-4
Replenishment
Rate
(mL per 100 ft)
35 mm 16 mm
1250
625
(D-96R) (D-96R)
12,000 6000
850 425
12,000 6000
1 Agitation in the developer and fixing bath should be by recirculation
through submerged spray jets that impinge on the film strands.
2 Develop to recommended control gamma.
3 Countercurrent flow of fixer-laden water overflow from the wash tank, pH
about 6.
4 Many factors affect the drying: air temperature, relative humidity (RH);
volume, rate and distribution of the air flow; final squeegeeing, etc.
In a conventional convection-type drying cabinet with air
at about 95°F (35°C) and 40 to 50 percent RH, drying will
take 15 to 20 minutes. With an impingement-type drying
cabinet, however, with a higher temperature and lower RH,
drying time is greatly reduced. With either type of dryer, the
film should be dry without tackiness 1/2 to 2/3 of the way
through. Upon cooling to room temperature after leaving the
dryer, the film should be in equilibrium with the room air at
approximately 50 percent RH.
IDENTIFICATION
After processing, the product code numbers 2234, 3234,
5234, or 7234; emulsion and roll identification; and
KEYKODE number (KD) are visible along the length of the
film.
©Eastman Kodak Company, 2004



ETC
ETC

H15234 Datasheet Preview

H15234 Datasheet

EASTMAN Fine Grain Duplicating Panchromatic Negative Film 2234/ 3234/ 5234/ 7234

No Preview Available !

H15234 pdf
IMAGE STRUCTURE
MTF
The modulation-transfer curves, the diffuse rms granularity,
and the resolving-power data were generated from samples
of 5234 Film exposed with tungsten light and processed as
recommended in Process D-96 at 70°F (21°C) to the
recommended control gamma. For more information on
image-structure characteristics, see KODAK Publication
No. H-1, KODAK Motion Picture Film.
rms Granularity
Refer to curve.
Read with a microdensitometer using a 48-micrometer
aperture.
The “perception” of the graininess of any film is highly
dependent on scene content, complexity, color, and density.
Other factors, such as film age, processing, exposure
conditions, and telecine transfer may also have significant
effects.
AVAILABLE ROLL LENGTHS
For information on film roll lengths, check KODAK Motion
Picture Film Price Catalog or see a Kodak sales
representative in your country.
CURVES
CChhaararactcetreisritsicticCuCruvrevses
4.0
Exposure: Tungsten, 1/100 second with
KODAK Heat Absorbing Glass No. 4023
Process: KODAK Developer
D-96 at 21 C (70 F)
3.0 Densitometry: Status M (Blue)
0.8
Time
0.7 Density
0.6
2.0 0.5
Time Fog
0.10
0.05
0.4
2 6 8 10 12
DEVELOPMENT TIME
(minutes)
1.0
12 min. =0.78
8 min. =0.65
4 min. =0.47
0.0
1.0
Base Density
0.0 1.0
2.0
LOG EXPOSURE (lux-seconds)
3.0
F010_0020AC
Specptral Sensitivity Cuyrves
1.0
D = 0.3 Above gross fog
0.0
D = 1.0 Above gross fog
1.0
2.0 Effective Exposure:1.4 sec
Process: KODAK Developer D-96
at 21 C (70 F) to recommended
control gamma
Densitometry: Diffuse visual
3.0
250 300 350 400 450 500 550 600 650 700 750
WAVELENGTH (nm)
*Sensitivity = reciprocal of exposure (ergs/cm2 ) required
to produce specified density
F010_0021AC
Modulation Transfer Curve
200
100
70
50
30
20
10
7
5
3
2
1
1
Effective Exposure:Tungsten
Process: KODAK Developer D-96
at 21 C (70 F) to recommended
control gamma
Densitometry: Diffuse visual
2 3 4 5 10 20
50 100 200
SPATIAL FREQUENCY (cycles/mm)
600
F AC
NOTICE: The sensitometric curves and data in this
publication represent product tested under the conditions of
exposure and processing specified. They are representative
of production coatings, and therefore do not apply directly to
a particular box or roll of photographic material. They do not
represent standards or specifications that must be met by
Eastman Kodak Company. The company reserves the right
to change and improve product characteristics at any time.
2 EASTMAN Fine Grain Duplicating Panchromatic Negative Film 2234, 3234, 5234, 7234 H-1-5234t


Part Number H15234
Description EASTMAN Fine Grain Duplicating Panchromatic Negative Film 2234/ 3234/ 5234/ 7234
Maker ETC
Total Page 4 Pages
PDF Download
H15234 pdf
Download PDF File
H15234 pdf
View for Mobile






Related Datasheet

1 H15234 EASTMAN Fine Grain Duplicating Panchromatic Negative Film 2234/ 3234/ 5234/ 7234 ETC
ETC
H15234 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components