http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Analog Devices Semiconductor Electronic Components Datasheet

ADIS16355 Datasheet

Tri-Axis Inertial Sensor

No Preview Available !

ADIS16355 pdf
www.daFtaEsAhTeeUt4RuE.cSom
Tri-axis gyroscope with digital range scaling
±75, ±150, ±300°/s settings
14-bit resolution
Tri-axis accelerometer
±10 g measurement range
14-bit resolution
350 Hz bandwidth
Factory calibrated sensitivity, bias, and alignment
ADIS16350: +25°C, ADIS16355: -40°C to +85°C
Digitally controlled bias calibration
Digitally controlled sample rate
Digitally controlled filtering
Programmable condition monitoring
Auxiliary digital input/output
Digitally activated self-test
Programmable power management
Embedded temperature sensor
SPI-compatible serial interface
Auxiliary 12-bit ADC input and DAC output
Single-supply operation: 4.75 V to 5.25 V
2000 g shock survivability
APPLICATIONS
Guidance and control
Platform control and stabilization
Motion control and analysis
Inertial measurement units
General navigation
Image stabilization
RoboticsFunctional Block Diagram
GENERAL DESCRIPTION
The ADIS16350/5 iSensorTM is a complete triple axis gyroscope
and triple axis accelerometer inertial sensing system. This
sensor combines the Analog Devices Inc. iMEMS® and mixed
signal processing technology to produce a highly integrated
solution, providing calibrated, digital inertial sensing. An SPI
interface and simple output register structure allow for easy
system interface and programming. The ADIS16355 provides
calibration over a temperature range of -40°C to +85°C.
The SPI port provides access to the following embedded
sensors: X, Y, and Z axis angular rates; X, Y, and Z axis linear
acceleration; internal temperature; power supply; and auxiliary
analog input. The inertial sensors are precision aligned across
axes, and are calibrated for offset and sensitivity. An embedded
controller dynamically compensates for all major influences on
Rev. PrG
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
Tri-Axis Inertial Sensor
ADIS16355
AUX_ADC
AUX_DAC
TEMPERATURE
SENSORS
TRI-AXIS MEMS
ANGULAR RATE SENSOR
SIGNAL
CONDITIONING
AND
CONVERSION
CALIBRATION
AND
DIGITAL
PROCESSING
SELF-TEST
TRI-AXIS MEMS
ACCELLERATION
SENSOR
DIGITAL
CONTROL
SPI
PORT
CS
SCLK
DIN
DOUT
VCC
GND
POWER
MANAGEMENT
ALARMS
AUX
I/O
RST
Figure 1.
DIO1 DIO2
the MEMS sensors; thus maintaining highly accurate sensor
outputs without further testing, circuitry, or user intervention.
System integration is simplified with the following additional
programmable features:
In-system auto bias calibration
Digital filtering and sample rate
Self test
Power management
Condition monitoring
Auxiliary digital input/output
This compact module is approximately 23 mm × 23 mm ×
23 mm and provides a convenient flex-based connector system.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.


Analog Devices Semiconductor Electronic Components Datasheet

ADIS16355 Datasheet

Tri-Axis Inertial Sensor

No Preview Available !

ADIS16355 pdf
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
www.datasheet4u.com
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Timing Specifications .................................................................. 5
Timing Diagrams.......................................................................... 5
Absolute Maximum Ratings............................................................ 6
ESD Caution.................................................................................. 6
Pin Configuration and Function Descriptions............................. 7
Typical Performance Characteristics ............................................. 8
Theory of Operation ...................................................................... 12
Overview...................................................................................... 12
Gyroscope Sensor....................................................................... 12
Accelerometer Sensor ................................................................ 12
Factory Calibration .................................................................... 12
REVISION HISTORY
10/31—Revision PrG: Document performance, pending release
ADIS16355
Control Register Structure ........................................................ 12
Auxiliary ADC Function........................................................... 12
Basic Operation .............................................................................. 13
Serial Peripheral Interface (SPI)............................................... 13
Data Output Register Access .................................................... 14
Programming and Control............................................................ 16
Control Register Overview ....................................................... 16
Control Register Structure ........................................................ 16
Calibration................................................................................... 17
Global Commands ..................................................................... 17
Operational Control................................................................... 18
Status and Diagnostics............................................................... 20
Applications Information .............................................................. 23
Installation Guidelines............................................................... 23
Outline Dimensions ....................................................................... 25
Ordering Guide .......................................................................... 25
Rev. PrG | Page 2 of 28


Part Number ADIS16355
Description Tri-Axis Inertial Sensor
Maker Analog Devices
Total Page 28 Pages
PDF Download
ADIS16355 pdf
Download PDF File
ADIS16355 pdf
View for Mobile



Buy Electronic Components




Related Datasheet

1 ADIS16350 Tri Axis Gyroscope & Accelerometer Analog Devices
Analog Devices
ADIS16350 pdf
2 ADIS16354 High Precision Tri-Axis Inertial Sensor Analog Devices
Analog Devices
ADIS16354 pdf
3 ADIS16355 Tri-Axis Inertial Sensor Analog Devices
Analog Devices
ADIS16355 pdf








Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components