http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Analog Devices Semiconductor Electronic Components Datasheet

AD586 Datasheet

High Precision 5 V Reference

No Preview Available !

AD586 pdf
FEATURES
Laser trimmed to high accuracy
5.000 V ±2.0 mV (M grade)
Trimmed temperature coefficient
2 ppm/°C max, 0°C to 70°C (M grade)
5 ppm/°C max, −40°C to +85°C (B and L grades)
10 ppm/°C max, −55°C to +125°C (T grade)
Low noise, 100 nV/√Hz
Noise reduction capability
Output trim capability
MIL-STD-883-compliant versions available
Industrial temperature range SOICs available
Output capable of sourcing or sinking 10 mA
GENERAL DESCRIPTION
The AD586 represents a major advance in state-of-the-art
monolithic voltage references. Using a proprietary ion-implanted
buried Zener diode and laser wafer trimming of high stability
thin-film resistors, the AD586 provides outstanding perform-
ance at low cost.
The AD586 offers much higher performance than most other
5 V references. Because the AD586 uses an industry-standard
pinout, many systems can be upgraded instantly with the
AD586.
The buried Zener approach to reference design provides lower
noise and drift than band gap voltage references. The AD586
offers a noise reduction pin that can be used to further reduce
the noise level generated by the buried Zener.
The AD586 is recommended for use as a reference for 8-, 10-,
12-, 14-, or 16-bit DACs that require an external precision
reference. The device is also ideal for successive approximation
or integrating ADCs with up to 14 bits of accuracy and, in
general, can offer better performance than the standard on-chip
references.
The AD586J, AD586K, AD586L, and AD586M are specified for
operation from 0°C to 70°C; the AD586A and AD586B are
specified for −40°C to +85°C operation; and the AD586S and
AD586T are specified for −55°C to +125°C operation.
High Precision
5 V Reference
AD586
The AD586J, AD586K, AD586L, and AD586M are available in
an 8-lead PDIP; the AD586J, AD586K, AD586L, AD586A, and
AD586B are available in an 8-lead SOIC package; and the
AD586J, AD586K, AD586L, AD586S, and AD586T are
available in an 8-lead CERDIP package.
VIN NOISE REDUCTION
28
RZ1 RS
RZ2
AD586
A1
RF
RI
6 VOUT
RT
5 TRIM
4
GND
NOTES
1. PINS 1, 3, AND 7 ARE INTERNAL TEST POINTS.
MAKE NO CONNECTIONS TO THESE POINTS.
Figure 1.
PRODUCT HIGHLIGHTS
1. Laser trimming of both initial accuracy and temperature
coefficients results in very low errors over temperature
without the use of external components. The AD586M has
a maximum deviation from 5.000 V of ±2.45 mV between
0°C and 70°C, and the AD586T guarantees ±7.5 mV
maximum total error between −55°C and +125°C.
2. For applications requiring higher precision, an optional
fine-trim connection is provided.
3. Any system using an industry-standard pinout reference
can be upgraded instantly with the AD586.
4. Output noise of the AD586 is very low, typically 4 µV p-p.
A noise reduction pin is provided for additional noise
filtering using an external capacitor.
5. The AD586 is available in versions compliant with
MIL-STD-883. Refer to the Analog Devices Military
Products Databook or the current AD586/883B data sheet
for detailed specifications.
Rev. G
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved.


Analog Devices Semiconductor Electronic Components Datasheet

AD586 Datasheet

High Precision 5 V Reference

No Preview Available !

AD586 pdf
AD586
TABLE OF CONTENTS
Specifications..................................................................................... 3
AD586J, AD586K/AD586A, AD586L/AD586B ....................... 3
AD586M, AD586S, AD586T....................................................... 4
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configurations and Function Descriptions ........................... 6
Theory of Operation ........................................................................ 7
Applying the AD586..................................................................... 7
Noise Performance and Reduction ............................................ 7
Turn-on Time................................................................................ 8
Dynamic Performance................................................................. 8
REVISION HISTORY
3/05—Rev. F to Rev. G
Updated Format..................................................................Universal
Split Specifications Table into Table 1 and Table 2....................... 3
Changes to Table 1............................................................................ 3
Added Figure 2 and Figure 4........................................................... 6
Updated Outline Dimensions ....................................................... 13
Changes to Ordering Guide .......................................................... 14
1/04—Rev. E to Rev. F
Changes to ORDERING GUIDE ................................................... 3
7/03—Rev. D to Rev. E
Removed AD586J CHIPS ..................................................Universal
Updated ORDERING GUIDE........................................................ 3
Change to Figure 3 ........................................................................... 4
Updated Figure 12 ............................................................................ 7
Updated OUTLINE DIMENSIONS .............................................. 9
4/01—Rev. C to Rev. D
Changed Figure 10 to Table 1
(Maximum Output Change in mV)............................................... 6
11/95—Revision 0: Initial Version
Load Regulation ............................................................................9
Temperature Performance............................................................9
Negative Reference Voltage from an AD586........................... 10
Using the AD586 with Converters ........................................... 10
5 V Reference with Multiplying CMOS DACs or ADCs ...... 11
Stacked Precision References for Multiple Voltages .............. 11
Precision Current Source .......................................................... 11
Precision High Current Supply ................................................ 11
Outline Dimensions ....................................................................... 13
Ordering Guide .......................................................................... 14
Rev. G | Page 2 of 16


Part Number AD586
Description High Precision 5 V Reference
Maker Analog Devices
Total Page 16 Pages
PDF Download
AD586 pdf
Download PDF File
AD586 pdf
View for Mobile






Related Datasheet

1 AD580 High Precision 2.5 V IC Reference Analog Devices
Analog Devices
AD580 pdf
2 AD581 High Precision 10 V IC Reference Analog Devices
Analog Devices
AD581 pdf
3 AD582 Low Cost Sample/Hold Amplifier Analog Devices
Analog Devices
AD582 pdf
4 AD5821 single 10-bit digital-to-analog converter Analog Devices
Analog Devices
AD5821 pdf
5 AD5821A I2C DAC Analog Devices
Analog Devices
AD5821A pdf
6 AD5823 10-Bit VCM Driver Analog Devices
Analog Devices
AD5823 pdf
7 AD5823-1 10-Bit VCM Driver Analog Devices
Analog Devices
AD5823-1 pdf
8 AD583 IC Sample and Hold Gated OP Amp Analog Devices
Analog Devices
AD583 pdf
9 AD584 Precision Voltage Reference Analog Devices
Analog Devices
AD584 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components