System Ready, 18-Bit ±1 LSB INL,
Voltage Output DAC
True 18-bit voltage output DAC, ±1 LSB INL
8 nV/√Hz output noise spectral density
0.025 LSB long-term linearity error stability
±0.018 ppm/°C gain error temperature coefficient
2.5 µs output voltage settling time
3.5 nV-sec midscale glitch impulse
Integrated precision reference buffers
Operating temperature range: −40°C to +125°C
4 mm × 5 mm LFCSP package
Wide power supply range of up to ±16.5 V
35 MHz Schmitt triggered digital interface
1.8 V-compatible digital interface
Test and measurement
Scientific and aerospace instrumentation
Data acquisition systems
Digital gain and offset adjustment
Power supply control
The AD57801 is a true 18-bit, unbuffered voltage output DAC
that operates from a bipolar supply of up to 33 V. The AD5780
accepts a positive reference input range of 5 V to VDD − 2.5 V
and a negative reference input range of VSS + 2.5 V to 0 V. Both
reference inputs are buffered on chip and external buffers are
not required. The AD5780 offers a relative accuracy specifica-
tion of ±1 LSB maximum range, and operation is guaranteed
monotonic with a ±1 LSB DNL maximum range specification.
The part uses a versatile 3-wire serial interface that operates at
clock rates of up to 35 MHz and is compatible with standard
SPI, QSPI™, MICROWIRE™, and DSP interface standards. The
part incorporates a power-on reset circuit that ensures that the
DAC output powers up to 0 V in a known output impedance
state and remains in this state until a valid write to the device
takes place. The part provides an output clamp feature that
places the output in a defined load state.
FUNCTIONAL BLOCK DIAGRAM
AND CLEAR LOGIC
DGND VSS AGND VREFN
Table 1. Related Devices
20-bit, 2 LSB accurate DAC
20-bit, 1 ppm accurate DAC
18-bit, 0.5 LSB accurate DAC
AD5541A/AD5542A 16-bit, 1 LSB accurate 5 V DAC
16-bit, 0.5 LSB accurate DAC
1. True 18-bit accuracy.
2. Wide power supply range of up to ±16.5 V.
3. −40°C to +125°C operating temperature range.
4. Low 8 nV/√Hz noise.
5. Low ±0.018 ppm/°C gain error temperature coefficient.
Output Amplifier Buffer: AD8675, ADA4898-1, ADA4004-1
External Reference: ADR445, ADR4550
DC-to-DC Design Tool: ADIsimPower™
Additional companion products on the AD5780 product page
1 Protected by U.S. Patent No. 7,884,747 and 8,089,380.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2013 Analog Devices, Inc. All rights reserved.