Preliminary Technical Data
Compact +30V/±15V 256-Position Digital
+2.7V to +30V Single Supply Operation
±2.7V to ±15V Dual Supply Operation
End-to-end resistance 10 kΩ, 50 kΩ, 100 kΩ
Low temperature coefficient 35 ppm/°C
Power-on preset to midscale
SPI compatible interface
Automotive temperature range –40°C to +105°C
Compact MSOP-10 (3 mm × 4.9 mm) package
Programmable Gain and Offset
Programmable Power Supply
Industrial Actuator Control
LED Array Driver
Audio Volume Control
General Purpose DAC Replacement
Mechanical Potentiometer Replacement
The AD5290 is a low cost, compact 2.9 mm × 3 mm
+30V/±15V, 256-position digital potentiometer. This device
performs the same electronic adjustment function as
mechanical potentiometers or variable resistors, with enhanced
resolution, solid-state reliability, and superior low temperature
The wiper settings are controllable through an SPI compatible
digital interface. The resistance between the wiper and either
end point of the fixed resistor varies linearly with respect to the
digital code transferred into the RDAC latch.
The AD5290 is available in 10k, 50k, and 100kΩ in compact
MSOP-10 package. AD5290 can be operated from a single
supply +2.7 V to +30 V or dual supply ±2.7 V to ±15 V. All
parts are guaranteed to operate over the automotive
temperature range of -40°C to +105°C.
FUNCTIONAL BLOCK DIAGRAM
The terms digital potentiometer and RDAC are used interchangeably.
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.