http://www.www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf




Analog Devices Semiconductor Electronic Components Datasheet

AD5114 Datasheet

(AD5110 - AD5114) Nonvolatile Digital Potentiometer

No Preview Available !

AD5114 pdf
Data Sheet
Single-Channel, 128-/64-/32-Position, I2C, ±8%
Resistor Tolerance, Nonvolatile Digital Potentiometer
AD5110/AD5112/AD5114
FEATURES
Single-channel, 128-/64-/32-position resolution
5 kΩ, 10 kΩ, 80 kΩ nominal resistance
Maximum ±8% nominal resistor tolerance error
Low wiper resistance
±6 mA maximum wiper current density
Resistor tolerance stored in EEPROM (0.1% accuracy)
Rheostat mode temperature coefficient: 35 ppm/°C
Potentiometer mode temperature coefficient: 5 ppm/°C
2.3 V to 5.5 V single-supply operation
1.8 V to 5.5 V logic supply operation
Power-on EEPROM refresh time < 50 μs
I2C-compatible interface
Wiper setting and EEPROM readback
50-year typical data retention at 125°C
1 million write cycles
Wide operating temperature: −40°C to +125°C
Thin, 2 mm × 2 mm × 0.55 mm 8-lead LFCSP package
APPLICATIONS
Mechanical potentiometer replacement
Portable electronics level adjustment
Audio volume control
Low resolution DAC
LCD panel brightness and contrast control
Programmable voltage to current conversion
Programmable filters, delays, time constants
Feedback resistor programmable power supply
Sensor calibration
GENERAL DESCRIPTION
The AD5110/AD5112/AD5114 provide a nonvolatile solution
for 128-/64-/32-position adjustment applications, offering
guaranteed low resistor tolerance errors of ±8% and up to
±6 mA current density in the A, B, and W pins. The low resistor
tolerance, low nominal temperature coefficient and high
bandwidth simplify open-loop applications, as well as tolerance
matching applications.
The new low wiper resistance feature minimizes the wiper
resistance in the extremes of the resistor array to only 45 Ω,
typical.
The wiper settings are controllable through an I2C-compatible
digital interface that is also used to readback the wiper register
and EEPROM content. Resistor tolerance is stored within
EEPROM, providing an end-to-end tolerance accuracy of 0.1%.
FUNCTIONAL BLOCK DIAGRAM
VLOGIC
VDD
SDA
SCL
POWER-ON
RESET
AD5110/AD5112/AD5114
A
DATA
I2C
SERIAL
INTERFACE
DATA
EEPROM
RDAC
REGISTER
W
B
GND
Figure 1.
www.DataSheet.co.kr
The AD5110/AD5112/AD5114 are available in a 2 mm × 2 mm
LFCSP package. The parts are guaranteed to operate over the
extended industrial temperature range of −40°C to +125°C.
Table 1. ±8% Resistance Tolerance Family
Model Resistance (kΩ) Position
AD5110 10, 80
128
AD5111 10, 80
128
AD5112 5, 10, 80
64
AD5113 5, 10, 80
64
AD5116 5, 10, 80
64
AD5114 10, 80
32
AD5115 10, 80
32
Interface
I2C
Up/down
I2C
Up/down
Push-button
I2C
Up/down
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.
Datasheet pdf - http://www.DataSheet4U.net/


Analog Devices Semiconductor Electronic Components Datasheet

AD5114 Datasheet

(AD5110 - AD5114) Nonvolatile Digital Potentiometer

No Preview Available !

AD5114 pdf
AD5110/AD5112/AD5114
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Electrical Characteristics—AD5110 .......................................... 3
Electrical Characteristics—AD5112 .......................................... 5
Electrical Characteristics—AD5114 .......................................... 7
Interface Timing Specifications.................................................. 9
Shift Register and Timing Diagram ......................................... 10
Absolute Maximum Ratings.......................................................... 11
Thermal Resistance .................................................................... 11
ESD Caution................................................................................ 11
Pin Configuration and Function Descriptions........................... 12
Typical Performance Characteristics ........................................... 13
Test Circuits..................................................................................... 18
REVISION HISTORY
10/11—Revision 0: Initial Version
Data Sheet
Theory of Operation ...................................................................... 19
RDAC Register and EEPROM.................................................. 19
I2C Serial Data Interface ............................................................ 19
Input Shift Register .................................................................... 20
Write Operation.......................................................................... 21
EEPROM Write Acknowlegde Polling .................................... 23
Read Operation........................................................................... 23
Reset ............................................................................................. 23
Shutdown Mode ......................................................................... 23
RDAC Architecture.................................................................... 24
Programming the Variable Resistor......................................... 24
Programming the Potentiometer Divider............................... 25
Terminal Voltage Operating Range ......................................... 26
Power-Up Sequence ................................................................... 26
Layout and Power Supply Biasing ............................................ 26
Outline Dimensions ....................................................................... 27
Ordering Guide .......................................................................... 27
www.DataSheet.co.kr
Rev. 0 | Page 2 of 28
Datasheet pdf - http://www.DataSheet4U.net/


Part Number AD5114
Description (AD5110 - AD5114) Nonvolatile Digital Potentiometer
Maker Analog Devices
Total Page 28 Pages
PDF Download
AD5114 pdf
Download PDF File
AD5114 pdf
View for Mobile






Related Datasheet

1 AD5110 (AD5110 - AD5114) Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5110 pdf
2 AD5111 (AD5111 - AD5115) Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5111 pdf
3 AD5112 (AD5110 - AD5114) Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5112 pdf
4 AD5113 (AD5111 - AD5115) Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5113 pdf
5 AD5114 (AD5110 - AD5114) Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5114 pdf
6 AD5115 (AD5111 - AD5115) Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5115 pdf
7 AD5116 Nonvolatile Digital Potentiometer Analog Devices
Analog Devices
AD5116 pdf




Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components